InfiniteUp is ready for iPhone Duo. Fold to focus, unfold to plan →

Tariffs and Canadian Freight: The Cost Is Border Time

You do not own the goods, so nobody bills you the duty. You pay in detention, driver hours and equipment sitting still — and most carriers are still quoting transit times from a pre-tariff baseline.

In force since 8 September · what hit carriers

Both directions are now dutiable. Southbound, the US Section 338 measure captures a wide list at 50%, and CUSMA preference no longer clears those goods — so paperwork that moved freight in minutes for a decade can now trigger secondary review. Northbound, Canada’s counter-tariffs from 8 September cover $27.6 billion of US imports at 15%, 25% and 50%.

Your exposure is not duty. It is inspection intensity, classification disputes, held loads and detention — none of which appear on a rate confirmation unless you put them there. This is live now, not something coming: the counter-tariffs came into force on 8 September and your trucks are crossing under them today.

Talks between Ottawa and Washington have broken down, so plan on this lasting rather than lifting.

What we do about it: we work out where your lanes and commodity mix are exposed, build you a private AI knowledge base on your own manifests and agreements, and scope what to build next. The review also covers who else in the world would buy what your customers make, and which ports that freight would move through. See what you receive →


What this actually does to a fleet

  • Transit time became a variable. It used to be a number you could quote against. Inspection rates on captured commodity groups turned it into a range, and driver hours are consumed waiting.
  • Somebody else’s paperwork holds your truck. Shippers misdeclare goods now captured, loads are held, and the carrier absorbs the delay while the shipper and broker argue about it.
  • Lane demand is redistributing. Cross-border volume softens on captured categories while domestic lanes tighten. A fleet configured entirely for southbound freight has a utilization problem coming.

Three things to do this week

  1. Get a border delay surcharge into your rate confirmations. If detention beyond a defined window is not billable today, every additional inspection hour is a straight write-off. This clause is the highest-leverage document in your business right now.
  2. Pre-screen loads for captured commodity groups before dispatch. Knowing a load is high-scrutiny lets you plan the driver’s hours around it instead of discovering it at the booth.
  3. Re-measure your actual crossing times by lane and commodity. Most carriers are quoting from a baseline they have not checked since July.

What it looks like in practice

Worked example · a twelve-truck carrier running the Lower Mainland

Twelve tractors, nineteen trailers, fourteen drivers, two dispatchers. About forty southbound loads a week into Washington and Oregon, average linehaul $1,450, and roughly 70% of revenue comes off cross-border lanes. Three customers make up half of that.

Every inspection hour is a write-off. Not one rate confirmation in the file defines a free window or a detention rate. At forty loads a week, an extra ninety minutes at the booth is unpaid driver time the fleet simply absorbs.

Two of the three big customers look clear, and we will not pretend about the third. Section 338 covers 554 specific tariff subheadings, not whole categories. Screened by code rather than by category, two of the three freight types are not on the list. The third cannot be settled without the actual classification the shipper files.

The parcel rule is a revenue line nobody has claimed. The US $800 de minimis exemption ended on 29 August 2025, so every small parcel clears formally and carries a merchandise processing fee of around US$7.85. Since 1 September, US Customs requires an HS code on all cross-border shipments. A carrier that consolidates those entries is selling something the shippers cannot do for themselves.

Then the other half. A fleet is not an export, and nobody overseas is going to hire a BC carrier to run their domestic lanes. What travels is the customers’ freight: every load that stops going south has to reach Vancouver or Prince Rupert instead, and the drayage, container consolidation and export paperwork on that redirected volume is work this fleet is already equipped to do.

What we would build:

  • A manifest pre-screen that matches every line on a commercial invoice against the 554 captured subheadings by code, and flags the load at booking rather than at the booth.
  • A border clock in the driver app. Two taps, arrival and release, building a real dwell record by port and commodity group.
  • A rate confirmation template with a defined free window and an hourly detention rate, priced per lane off that dwell record so the number is defensible.
  • A consolidated-entry booking page for small southbound parcel shippers that collects HS code and declared value up front, so one entry covers the whole trailer.

None of that is a rebuild. It is a week or two of work that turns unpaid waiting into billable time, and gives the fleet something new to sell while cross-border volume settles.


What you receive

Six things, built for your operation, starting within 48 hours of checkout.

The core is a written review: deep research across your lanes, commodity mix and sector, with a human checking every finding against the actual schedules and discarding what is wrong. You also get a private AI knowledge base trained on your website, rate agreements, lane list and customer manifests — yours to keep, and able to answer “is this commodity captured, and which port is fastest for it?” with a source you can check. Running through both is a scoped plan of what we would build, with real hour estimates.

Alongside those: a slide deck, a one-page infographic, and video and audio overviews.

See a complete worked example →


What we would build for your fleet

  • An automated manifest parser that reads manifests and commercial invoices, flags captured commodities, and warns dispatch before the truck rolls.
  • A dynamic surcharge engine calculating border delay and fuel surcharges per lane from your own measured data, so the surcharge is defensible rather than arbitrary.
  • A live crossing-time dashboard tracking real dwell by port and commodity group, turning uncertainty into a number you can quote against.
  • A bonded routing planner modelling in-bond movement against direct entry to find the lower total-cost path per shipment.

And beyond tariffs: the dispatch, driver or customer-portal system you have been putting off. See our case studies.


And the other half — who else would buy this?

A fleet is not an export, and nobody in Rotterdam is going to hire a Nanaimo carrier to run their domestic lanes. What travels is your customers’ freight: every load that stops going south has to reach a port instead, and the carriers who already understand drayage to Vancouver, Prince Rupert, Montreal and Halifax, container consolidation and the export paperwork are the ones that redirected volume goes to.

Europe
CETA leaves 98% of EU tariff lines duty-free for Canadian goods, so the freight exists. It just needs to reach an east coast port.
Japan
CPTPP took Japanese duties on worked wood and aluminum products to zero. That load moves west, not south.
Australia & NZ
Long ocean legs and strict biosecurity. Clean documentation and clean trailers matter more than transit speed.
Getting found
Shippers newly hunting a port run search for a carrier who has already done one. Be the one they find.

Two things worth knowing

There is money for this

Ottawa has $7.5 billion behind tariff-hit businesses, including non-repayable contributions up to $3 million. We do not run those programs and take nothing from them. The full list →

Where the freight is going instead

Canadian exporters are actively opening non-US markets. That changes which lanes and which ports matter. Selling beyond the US →


Questions we get asked

We are the carrier, not the importer. Why does this affect us?

Because you carry the time cost. Duty is billed to the importer of record, but detention, driver hours, missed appointments and idle equipment sit with the carrier unless your rate agreement says otherwise.

Does a CUSMA certificate still speed up clearance?

Not for goods captured under Section 338. The duties apply regardless of preferential treatment, so a certificate that previously smoothed a crossing may no longer prevent assessment or review. Confirm current procedure with your customs broker.

Should we shift capacity to domestic lanes?

It depends on your equipment, customer concentration and commodity mix. That is a utilization model rather than a hunch, and building it for your actual lanes is a core part of the review.

Do I have to hire you for software afterwards?

No. The plan is written to be useful whether or not you ever work with us.


Get yours

1
Your Details
2
Checkout

Start Your Review

Optional

Submitting your information…

Choose Your Tier

$50 CAD

Nanaimo Local Discount (automatically applied if your business is headquartered in Nanaimo, BC).

Pay $50 CAD (Nanaimo)

Pay What You Can

No business should be excluded. If neither tier above is feasible right now, we have you covered.

Pay What You Can

After checkout: Please email tariffhelp@infiniteup.dev with your confirmation and business details. We’ll schedule your review within 48 hours.

Related

← Back to the tariff hub

The worked example above is an illustration rather than a client, but every tariff fact in it is real. Operational and strategic guidance from a software studio, not legal, customs, or tax advice. Confirm classification and duty liability with a licensed customs broker. Last reviewed 11 September 2026.